It’s why I never say “eat the rich”, instead say: “compost the rich”. That way everyone knows I am serious about both parts of the ‘joke’.

Edit: I remember why - I wanted to use a single button dimming option, and as far as I can tell, there wasn’t that option in Shelly natively. There isn’t really a “native” version of this in Tasmota, but someone had already laid out the method to do such a thing with rules and whatnot within the Tasmota console. But after tinkering with it all this morning, I think I busted it beyond repair, so I might give the native Shelly a try!

Mostly because I’m lazy. This device was set up before Shelly made it so easy to run offline versions of the native firmware. And I’ve got a handful of devices already running Tasmota, so I’m just resistant to change.

Yeah, Tasmota has ‘setoption19’ to enable autodiscovery, and I triggered it, and it finds a whole host of SENSORS - but none of them are the switches. It does add one entity which is a single switch. But it seems this just correlates to switch1. I’m thinking it has something to do with how I originally set up the dimmer… it was years ago, so I guess I need to dig into my notes and see if I can figure out what options I set on it before I moved it to it’s current spot.

for reference, the data spit out by Tasmota: {“Time”:“2024-08-29T15:17:19”,“Switch1”:“OFF”,“Switch2”:“OFF”,“ANALOG”:{“Temperature”:35.1},“ENERGY”:{“TotalStartTime”:“2021-07-13T17:05:01”,“Total”:37178.152,“Yesterday”:0.000,“Today”:0.000,“Period”:0,“Power”:0,“ApparentPower”:0,“ReactivePower”:0,“Factor”:1.00,“Voltage”:117,“Current”:0.000},“TempUnit”:“C”}

Ooooh! Finally. I have needed something like this to control the volume on my media PC.

I used to have an automation that detects when my HVAC turns on, and it bumps the volume of whatever I’m playing up a few clicks. Then turns it back down when the HVAC cycle finishes. Super handy due to the crazy loud HVAC in my house.

but there isn’t a “Big Vegan” industry with deep pockets to financially support astroturfing.

Well then who keeps sending me all this free tofu with envelopes of cash taped to it whenever I upvote a pro-vegan meme?

Not the person you asked, but in my experience, when I travel I will go to grocery stores often. I personally love seeing what grocery stores are like in other countries, so that ends up being quite a fun experience (for me). But more importantly- it lets you stock up on stuff that you can eat. You have to learn what foods are enjoyable for you to consume cold, or with minimal prep, but in the end it’s not too difficult.

The difference is scale.

Looking at just one animal we eat: pigs. Widely known as a quite intelligent animal.

In 2019, 1.3 billion pigs were slaughtered. That’s “billion” with a “B”. So every day that year- 3.5 MILLION pigs are killed by humans. Every. Day.

Literally until the moment I read your comment, I thought that community was “microbiology memes”

Not on topic, but wow.

I’ll just add that I’m a fan of valetudo, but it can be a bit more involved than your standard firmware swap. I had to build a pin breakout board, and race against time to root my vacuum because there is an auto-reset programmed into some robots that can brick your vacuum if the jailbreak isn’t finished when the reboot is triggered.

Just read the process through all the way before you decide on device.

I was sweating like I was in the hurt locker when I did mine, because my partner would have NEVER let me forget the time I bought a $900 robot vacuum and broke it before it even cleaned the floor once!

Hahah! This answer works for me, because I was unsure what db0 was. Now I hopefully learn two new acronyms

Ah, that’s what I was looking for. Thank you. I am not sure if an MQTT signal works well for dimming, but I guess I’ll give it a try, because otherwise I end up with two switches controlling the same set of lights in the same location… not idea.

Thanks!

In my experience, aqara motion/lux sensors are pretty binary. I have one in my greenhouse to help with my lighting, but the lux value goes from 0 to max when ANY amount of light hits it.

There is no way I can tell the difference between cloudy and sunny. I can’t tell the difference between 6am (sun just over the horizon, but still behind trees) and 12 noon.

I would love to be able to detect when the sun goes behind a tree and shades my garden, but that’s just not possible with the granularity of the data I’m getting.

Do you have a source for this?

Wow, that looks perfect. I wonder how strong the zigbee signal is in my back yard…

Also, did you try those moisture sensors? That might be the next step for my system.

Yeah, that’s the easy part. But what valve? How to power the valve plus the esp board? Waterproofing? Those are the tricky parts.

Ah, interesting. I might snag one to tinker with. I’m getting lazy in my ways, so generally things I have to take apart to flash get lower priority, but my greenhouse and garden are my favorite places to tinker.

Edit: I’m still figuring out how lemmy works. In one app it showed my reply was posted to another topic I was browsing at the time. So I deleted it, and tried to repost in this reply. But once it was removed, I couldn’t edit it. So I ended up replying to my own removed reply…

Ah, interesting. I might snag one to tinker with. I’m getting lazy in my ways, so generally things I have to take apart to flash get lower priority, but my greenhouse and garden are my favorite places to tinker.

Love me some Tasmota.

What are the connections on that thing though? It doesn’t look like standard garden hose thread?

Looks perfect, but I don’t see any shipping to the states. Not to mention, international shipping is gonna bump that cost up significantly!

I think this is the end game. But for now, I’m looking to get more dialed in control on just the simple on/off.

I got my garden rigged up with the different rate emitters based on what is in the different beds. So it’s configured to handle a single zone, but in the future I would love to have it broken down into more granular control.