What kind/brand of devices do you recommend and where do your source them? Things like smart outlets, bulbs, sensors, etc.

I have a hard time sourcing gear because it’s all either locked to Amazon/Google or requires the manufacturer’s cloud services and their dedicated app.

I’m looking for devices that can work completely offline and only communicate with my HA/MQTT or at least a local base station that can bridge to HA.

For the last few years, I’ve been buying bulbs/outlets from AliExpress with Tasmota pre-flashed. Before that, I was ordering them from Amazon and re-flashing them, but that was always a crapshoot as not all of them were compatible with tuya-convert. They’re also ridiculously difficult to disassemble to flash manually.

Anybody willing to share some tips to source some new devices?

Edit: I’ve also built a few custom sensors with ESP8266 and ESP-Home but they’re not particularly pretty.

Edit 2: Thanks everyone! I think I’m going to look into some Zigbee devices and bridges. That sounds like the most “open” way to expand my smart home gear.

  • Admiral Patrick@dubvee.orgOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    That sounds exactly what I want. I will definitely be looking into a Zigbee hub.

    Any problematic Zigbee hubs I should watch out for? Or just look for one that’s explicitly supported by HA?

      • Admiral Patrick@dubvee.orgOP
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        Awesome, thanks. That’s a great starting point.

        Also, it’ll be nice to free up some wifi spectrum. My devices are all on an isolated 2.4 GHz network and that band gets quite noisy.

          • Admiral Patrick@dubvee.orgOP
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            Yeah, that’s probably the direction I’m going to start looking. Pretty much every device I run uses MQTT to communicate with HA, including some custom buttons I keep around the house.

            The only sticking point is going to be reconfiguring my HA server to speak to a USB device. It’s currently Dockerized, and I’ve got little experience passing through USB devices that aren’t serial adapters. Not a deal breaker, but definitely a speedbump.

            • boothin@infosec.pub
              link
              fedilink
              English
              arrow-up
              1
              ·
              1 year ago

              I’ve tried a few different USB zigbee coordinators, but the one I ended up sticking with is the 2652 based coordinator from tubeszb that is Ethernet or USB. I had issues with the USB passthrough to the vm whenever I had to restart the vm, so using that one over Ethernet fixed all my issues.